USED SANY SY215C-9 EXCAVATOR

I. Basic Specifications

• Model: SY215C-9
• Tonnage: 21 tons
• Operating Weight: Approximately 21 tons
• Bucket Capacity: 0.93 cubic meters
• Country of Origin: Shanghai

II. Engine Parameters

• Engine Model: Water-cooled Engine
• Rated Power: 114 kW / 2,050 rpm
• Cooling Method: Water-cooled

III. Performance Parameters

• Traveling Speed: High speed 5.4 km/h, Low speed 3.3 km/h
• Slewing Speed: 11 rpm
• Gradeability: 70%
• Ground Pressure: 46.5~47.4 kPa
• Bucket Digging Force: 138 kN
• Arm Digging Force: 103 kN

IV. Hydraulic System Parameters

• Maximum Pump Flow: 2 × 210 L/min
• Main Relief Pressure Setting: 34.3 MPa
• Travel Hydraulic Circuit: 34.3 MPa
• Slewing Hydraulic Circuit: 25.5 MPa
• Control Hydraulic Circuit: 3.9 MPa

V. Dimensions

• Overall Length (Transport): 9,397 mm
• Overall Width (Transport): 2,980 mm
• Overall Height (Transport): 2,956 mm
• Cab Full Height: 2,990 mm
• Upper Structure Width: 2,710 mm
• Track Ground Contact Length: 3,445 mm
• Total Track Length: 4,250 mm
• Track Plate Width: 600 mm
• Total Track Width: 2,980 mm
• Track Gauge: 2,380 mm
• Minimum Ground Clearance: 440 mm
• Minimum Swing Radius (Front Equipment): 3,595 mm
• Rear Swing Radius: 2,750 mm

VI. Operating Range

• Maximum Digging Radius: 9,885 mm
• Maximum Digging Depth: 6,600 mm
• Maximum Digging Height: 9,305 mm
• Maximum Dumping Height: 6,475 mm
• Maximum Vertical Digging Depth: 5,800 mm